DIY Washi Tape Magnets

Materials:

Card stock

Magnet strip

A Marker

Cute Washi Tape

Step 1: Draw some cute shapes for your magnets (Hearts, diamonds, stars, etc.)

Then, cut the shapes out.

Step 2: Place washi tape of your choice over the the card stock shapes. You can use different mix different tapes to create a cute contrasting look. Next cut the excess tape following the edges of 

the shape.

Step 4: Cut a small square to fit the size of the shape so it is not seen from the front. Then place it on the back of the shape.

Step 5: This step is the most fun! Find all your cutest pictures, postcards, paintings (and even princess autographs) to hang with the magnets on your refrigerator or any thing else magnetic.

Thanks for reading! I hope you enjoyed this post. Comment below with some cute shape or washi tape ideas for this project!

:) Dzifah

DIY Felt Earbud Holder

 I'm always throwing my headphones into my backpack or purse where they always 

get super tangled. I've seen some cute headphone holders on Etsy and Pinterest and 

I knew I had to make my own. There great at keeping ear buds untangled and there 

super easy to make!

 You'll Need: Two colors of felt, Scissors, Two jars of different sizes, a sewing machine or 

needle and thread, Chalk, and a button

 Start by tracing around the jars on the felt using chalk. You'll want two different sized 

circles from different colors of felt.

Next cut out the two circles you traced. I used special scissors called pinking shears to make 

this cute zigzag design.

Now place the smaller circle in the center of the large circle and sew them together. 

Next you'll want to sew on a button. Make sure to put the button on the inside of the ear 

bud holder. For example I flipped mine over to the yellow side and and placed the button 

close to the top.To find the where to put the button hole fold it in half and cut a small slit 

where the button meets.

Now your done! you'll will never have tangled ear buds again. :)

I love these so much. There super useful and super cute. Definitely a win win!I hope you like 

this DIY. Thanks for reading!

-Dzifah

DIY Tissue Paper Wreath

Hello Everyone! Can you believe Christmas almost here? I'm super excited about it, and even more excited that winter break will start this weekend.

Today I'm sharing this simple tissue paper wreath I made for my room. I think its a festive and simple way to add some color to any space for the holiday season. 

Materials:

A foam wreath

Tissue Paper (any colors)

Ribbon

Wire

Scissors

Hot glue gun

Pom poms (optional)

Step 1: Cut strips about 1 1/2 inches wide from the tissue paper. Then make slits in each peace to make the fringe and cut pieces that will fit around the foam.

Step 2: Using a hot glue gun make a dot of glue on the back side of the wreath and stick the tissue to it. Wrap the tissue around and glue the other end down in the same spot. 

Continue step 2 till you have covered the whole wreath with your same color pattern.

Step 3: Turn the wreath over to the back and poke a small hole in the foam using the scissors. Make a loop out of a small piece of wire, stick the ends in to the hole and add some hot glue. Hold the wire place for a few seconds till the glue dries. This will help you hang the wreath.

Step 4: To make the bow simply tie a bow using the ribbon of your choice. To add a little extra sparkle I added a glittery pom pom in the middle. To put on the bow try hanging it up to ensure that the bow is centered correctly.

This wreath is super simple to make and very cute to have around your house. I looks great hanging on a door or set on a mantle. I Hope you enjoyed this DIY. Happy Holidays!!!

DIY Pencil Bag

Hello everyone! Today I'm sharing this cute DIY pencil bag that I made a little 

while ago for school. It's super simple and cute and its a great way to carry pencils, 

pens and anything else. 

Materials:

Printed fabric

Felt(any color)

1 medium sized button

thread 

a needle

a sewing machine

scissors

Step 1: Cut both your printed flower and felt. The printed fabric should be 9 by 11 inches. 

The felt should be 9 by 4 inches and the two of the corners should be rounded.

Step 2: Hem one side of the printed fabric. Simply fold the fabric about half an inch 

and pin it in place. Then sew along the pin line.

 Step 3: Pin of the flap. Line it up with the top edge of the fabric. Pin it on the 

brighter side of the printed fabric. Then sew it along the pin line.

 Step 4: Fold the fabric so that the dull side of the fabric is showing. line up the hemmed 

side of the fabric to where the flap begins and pin it in place and sew.

Step 5: Flip the bag right side out. mark where you want your button on both the bag 

and the flap then sew it on and cut a button hole.  

Once you finish this you will be done! I hope you enjoyed this post!

DIY Button Earrings

Today is very exciting because this is my very first DIY post! 

I will be showing you how to make your own earrings out of some cute buttons.

Materials:

-small to medium sized buttons of your choice 

-a marker

-super glue or craft glue

-blank earring studs and backings (you can get these

 at a craft store like Hobby Lobby)

STEP 1: 

Using your black marker make a dot slightly above the center of the of each button.

STEP 2:

Apply the glue on to the a blank earring stud.

STEP 3:

place the earring back on to the button where you put the 

marking. Hold it in place for a few seconds so that the glue can dry.

Now you are finished! I hope you enjoyed this DIY 

and I hope you make your own button earrings because there just so cute and simple to make!